Product Introduction:
Can be used for Folded solar panel, easy to carry for camping, PV, yacht. MPPT tracking efficiency can reach to 99.9%. LCD display can see the running status easily.
MT1050EU supports 130W PV.
MT1550EU supports 200W PV. This kind MPPT is very popular on the Europe market. We get rid of 24V system and make it to suit for 12V battery only, which saves a big cost. Because barely nobody use 10A,15A MPPT for 24V system.
Parameters:
Charger location & installation
Controller employs components that tend to produce arcs or sparks. NEVER install in battery compartment or in the presence of explosive gases.
Protect all wiring from physical damage, vibration and excessive heat.
Ensure that the controller is properly setup for the battery being charged.
Do not expose the controller to rain or snow.
Ensure all terminating connections are clean and tight to prevent arcing and overheating.
Charging system must be properly installed as described in these instructions prior to operation.
Do not connect to a PV array capable of producing greater than 40 amps of short circuit current @ 25°C.
Do not connect input to DC source directly with load, Solar Charge Controller need to .be powered by solar panel.
Hot Tags: 10a 15a mppt solar charger, China 10a 15a mppt solar charger manufacturers, 24v mppt solar charge controller, solar charge controller for commercial use, off grid mppt solar charge controller, high efficiency mppt solar charge controller, solar charge controller for solar dryer, short circuit protection mppt solar charge controller
