Description
Technical Parameters
- Complete isolation-type inverter technology.
- Adoption of advanced SPWM technology, pure sine wave output.
- Dynamic current loop control technology to ensure the inverter's reliable operation.
- Wide DC input voltage range. Low output harmonic distortion(THD≤2%).
- LED indicators for input voltage range, normal output & failure state.
- Extensive protections: short-circuit, overload, under/over input voltage, over-temperature, and inverter's inner fault identification protections.
- The output voltage and frequency can be switched. Optional energy SAV mode(saving mode).
- Wide working temperature range (industrial level).
- Continuous operation at full power. Low power consumption mode is optional.
- Excellent EMC characteristics can be used in the power quality requirements of high occasions.
Parameters:
| Item | EPM2000-41 | EPM2000-42 |
| Electrical Parameters | ||
| Input rated voltage | 48V | |
| Input voltage range | 43.2~64Vdc | |
| No load current | ≤0.3A@48Vdc | ≤0.4A@48Vdc |
| Output voltage | 110/127Vac | 220/230Vac |
| Continuous power | 2000W | |
| Power 60sec | 2100~3000W | |
| Power 1.5sec | 3000~4000W | |
| Surge Power | <4000W | |
| Output Mode | Single-phase electricity | |
| Output wave | Pure sine wave | |
| Frequency | 50/60Hz | |
| Diatortion THD | THD≤2%(Resisitive load) | |
| Efficiency at full load *1 | 90.6% | 93% |
| Max. efficiency *2 | 93.1% | 94.2% |
| SAV mode | 0.23A; The load is detected every 10sec, if the output power is greaterthan 20W, it will output continuously |
0.2A; The load is detected every 10sec, if the output power is greaterthan 20W, it will output continuously |
| DC current | 45A | |
| Shutdown status | ＜1mA | |
| Fuse | 30A*4 | |
| Environment Parameters | ||
| Dimension | 421*228*124.5mm | |
| Hole Size | φ8mm | |
| Weight | 5.4Kg | |
| Working temperature | -20℃~+50℃ | |
| Storage temperature | -35℃~+70℃ | |
| Humidity | ＜95%(N.C.) | |
| Altitude | ＜5000m(Derating to operate accoding to IEC62040 at a height exceeding 1000m) |
|
| Other Parameters | ||
| Insulation | Between AC output terminals and metal case: ≥550MΩ | |
| Dielectric strenth | Between AC output terminals and metal case: Test voltage AC1500V, 1min |
|
| Application | Household appliances, cars, solar system and so on | |
* 1. The DC input is the rated voltage, and the pure resistive full load power is the continuous output power.
* 2. The DC input is the rated voltage and the maximum efficiency under different load power conditions.
* 3. Select the appropriate inverter according to the voltage standards of different countries.
Hot Tags: 48v pure sine wave solar inverter 2000w 220v, China 48v pure sine wave solar inverter 2000w 220v manufacturers, solar charge controller for any solar power system, solar charge controller for solar gate opener, solar charge controller for backup power, 24v mppt solar charge controller, solar charge controller for solar fence charger, solar charge controller for rv
